Choice Of Location; Fitting - Smeg SCP38X User Manual

EN 2 / INSTALLING YOUR APPLIANCE
536
22
595
310
• • CHOICE OF LOCATION
The diagrams
dimensions of a cabinet that will be able to
hold your oven.
The oven can be installed under a worktop or
in a column of cabinetry (open* or closed)
having the appropriate dimensions for built-in
installation (see diagram above).
Your oven has optimised air circulation that
allows it to achieve remarkable cooking and
cleaning results if the following guidelines are
followed:
• Centre the oven in the cabinet so as to
guarantee a minimum distance of 5 mm
between the appliance and the neighbouring
cabinet.
• The material or coating of the cabinet must
be heat-resistant.
• For increased stability, fix the oven in the
cabinet by means of 2 screws through the
holes designed for this purpose on the lateral
mounts (fig.1).
555
560-568
above determine
20
560-568

FITTING

• •
To do this:
1) Remove the rubber screw covers to access
the
the mounting holes.
2) Drill a Ø 2 mm hole in the cabinet panel to
avoid splitting the wood.
3) Attach the oven with the two screws.
4) Replace the rubber screw covers (they also
serve to absorb the shock caused by closing
the oven door).
(*) if the cabinet is open, its opening must be
70 mm (maximum).
Tip
To be certain that you have properly
installed your appliance, do not hesitate to
seek advice from a household appliance
specialist.
6
50
550 mini 400
fig.1