Pyrolysis: Automatic Oven Cleaning - Smeg SFA390X Instruction Manual

Built-in oven
Table of Contents

Advertisement

4.10 Pyrolysis: automatic oven
cleaning
Pyrolysis is an automatic high-
temperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Preliminary operations
Before starting the pyrolysis cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn deposits, spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the racks/trays support frames.
• Remove the upper guard (where
present).
• Close the door.
34
Cleaning and maintenance
Pyrolysis setting
1. Turn the function knob until
is activated; the
will flash.
2. Turn the temperature knob to the right or
to the left to set the cleaning cycle
duration from a minimum of 2 hours to a
maximum of 3 hours (except for the
function whose duration is 120
minutes).
3. Press the temperature knob to start the
pyrolysis cycle. The
will stop flashing and be lit steadily.
Recommended pyrolysis duration:
• Light dirt: 2 hours.
• Medium dirt: 2 hours and a half.
• Heavy dirt: 3 hours.
Pyrolysis
4. The display shows "Pyro" and the
remaining time to indicate that the
appliance is carrying out the automatic
cleaning cycle.
5. Two minutes after the pyrolysis cycle has
started the door is locked (the door lock
indicator light
or
indicator light
indicator light
comes on) by a device

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sfpa390xSfa125Sfpa125

Table of Contents