Programming Clock - Smeg SOU3300TX Instruction Manual

Convection bottom
The combination of the fan with just
the bottom heating element allows
cooking to be completed more
rapidly. This system is
recommended for sterilizing or for
finishing off the cooking of foods
which are already well-cooked on
the surface, but not inside, and
therefore need a little more heat.
Perfect for any type of food.
Vapor Clean
This function makes cleaning easier
using the steam produced by a little
quantity of water poured onto the
appropriate drawing placed on the
bottom.

2.4 Programming clock

Value decrease key
Clock key
Ensure that the programmer clock
shows the cooking duration
symbol
be possible to turn on the oven.
Press the key
programmer clock.
Value increase key
, otherwise it will not
to reset the
Use
Setting the time
If the time is not set, the oven will
not switch on.
On the first use, or after a power failure, the
digits
the appliance's display.
1. Keep the clock key
The dot between the hours and the
minutes flashes.
2. The time can be set via the value
increase key
key . Keep the key pressed in to
increase or decrease rapidly.
3. Wait 7 seconds. The dot between the
hours and the minutes stops flashing.
The symbol
that the appliance is ready to start cooking.
To change the time, hold down the
value increase key
decrease key
for two seconds, then set the time.
will be flashing on
for two seconds.
and value decrease
on the display indicates
and value
at the same time
13