Pyrolysis: Automatic Oven Cleaning (On Some Models Only) - Smeg Oven User Instructions

4.10 Pyrolysis: automatic oven
cleaning (on some models only)
Pyrolysis is an automatic high-
temperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Preliminary operations
Before starting the pyrolysis cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
26
Cleaning and maintenance
• Remove the racks/trays support frames.
• Remove the upper guard (where
present).
• Close the door.
Pyrolysis setting
1. Turn the function knob to symbol
.
2. Press the temperature knob to start the
pyrolysis cycle. The
comes on.
3. Turn the temperature knob to the right or
to the left to set the cleaning cycle
duration from a minimum of 2 hours to a
maximum of 3 hours (except for the
function whose duration is 120 minutes).
4. Press the temperature knob to start the
pyrolysis cycle.
Recommended pyrolysis duration:
• Light dirt: 120 minutes.
• Medium dirt: 150 minutes.
• Heavy dirt: 180 minutes.
or
indicator light