AC Power Cord
Covers
Safety Labels
1. Remove the power cord from the electrical outlet.
2. Check the power cord and power plug for visible cracks, wear, or damage.
3. Check for 1.0 ohm or less of resistance between the power cord ground
and the power supply frame.
1. Ensure that the covers are not damaged and that no sharp edges are
present.
1. Ensure that the Do Not Open-Do Not Service label (8SF7880) is attached to
__
.Jj
the right side (from the front) of the power supply.
~
C-2
AS/400 9401 Service In/ormation