Disk Unit Fru Locations - IBM Application System/400 Service Information

Disk Unit FRU Locations
This table is used to find the failing FRU location in the system. Go to the ''Type and Part Number List"
on page 2-62 to determine the part number.
Part Description Location Procedure
Disk drive and logic card 1. The device address is the second character from the left in function 14 of
the SRC.
If an error is displayed on the console, the device address is the sixth char-
acter from the left in the Address field.
2. The failing FRU is located in the device location corresponding to the device
address. See "Device Locations and Addresses" on page 5-15.
Chapter 3. Problem Isolation Procedures
3-7