Smeg CX51GVE Manual page 26

Instructions for the user
10.2.3 Burner caps and flame spreader crowns
For easier cleaning, the flame spreader crowns can be removed; wash
them with warm water and a non-abrasive detergent making sure to
remove any encrustation and wait until they are perfectly dry.
WARNING: never wash these parts in a dishwasher.
They can be left to soak in warm water and detergent.
Replace the flame spreader crowns, making sure that they are correctly
in place with their respective burner caps, making sure that the holes A in
the flame-spreaders are aligned with the igniters and thermocouples.
10.2.4 Igniters and thermocouples
For correct operation, on those models that have them, the igniters and
thermocouples must always be perfectly clean. Check them frequently and clean
them with a damp cloth if necessary. Remove any dry residues with a wooden
toothpick or a needle.
10.3 Cleaning the oven
For best oven upkeep, clean it regularly after having allowed it to cool. Take out all removable parts.
Clean the oven racks with hot water and non-abrasive detergent. Rinse and dry.
10.4 Door glazing
The glass in the door should always be kept thoroughly clean. Use absorbent kitchen roll; remove
stubborn dirt with a damp sponge and an ordinary detergent.
55