Setting The Cleaning Cycle - Smeg CG 92 Manual

Instructions for the user

9.7 Setting the cleaning cycle

Turn the function selection knob to to select the cleaning cycle.
Press and hold ; press or to set the duration of the cycle. The setting
varies between a minimum of 1h 30m and a maximum of 3h 00m.
Two minutes after the cleaning cycle (Pyrolysis) starts, a locking device will be
tripped, preventing the door being opened. The appropriate light will switch on to
indicate that the locking device has been activated.
At the end of the cleaning cycle the locking device will remain active until the
temperature inside the oven has reached a safety threshold. When the oven has
cooled down, collect the residues from automatic cleaning with a damp microfibre
cloth.
To select a cleaning cycle with a delayed start, after setting the duration press
. The time when the cleaning cycle will terminate will appear on the display.
Press and hold , and press or to set the time at which you wish to
terminate the cleaning cycle.
It is not possible to select any functions once the door locking device has been activated. Wait for to go
out.
30