Mercedes-Benz AMG GT Operator's Manual page 347

the low tire pressure telltale illuminates, you
should stop and check your tires as soon as
possible, and inflate them to the proper pres-
sure. Driving on a significantly under-inflated
tire causes the tire to overheat and can lead
to tire failure. Under-inflation also reduces fuel
efficiency and tire tread life, and may affect
the vehicle's handling and stopping ability.
Please note that the TPMS is not a substitute
for proper tire maintenance, and it is the driv-
er's responsibility to maintain correct tire
pressure, even if under-inflation has not
reached the level to trigger illumination of the
TPMS low tire pressure telltale.
Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate when
the system is not operating properly. The
TPMS malfunction indicator is combined with
the low tire pressure telltale. When the system
detects a malfunction, the telltale will flash for
approximately one minute and then remain
continuously illuminated. This sequence will
continue upon subsequent vehicle start-ups as
long as the malfunction exists.
When the malfunction indicator is illuminated,
the system may not be able to detect or signal
low tire pressure as intended. TPMS malfunc-
tions may occur for a variety of reasons,
including the installation of replacement or
alternate tires or wheels on the vehicle that
prevent the TPMS from functioning properly.
#
The system uses a tire pressure sensor to check
the pressure and temperature of the tires fitted on
the vehicle.
The tire pressure and tire temperature appear on
the driver's display.
If there is a substantial pressure loss or if the tire
temperature is excessive, you will be warned with
display messages ( page 434) or the h
/
warning lamp on the driver's display
( page 459).
/
The tire pressure monitor is only an aid. It is the
driver's responsibility to set the tire pressure to
the recommended cold tire pressure suitable for
the operating situation.
Wheels and tires 345
In most cases, the tire pressure monitor will auto-
matically update the new reference values after
you have changed the tire pressure. You can,
however, also update the reference values by
restarting the tire pressure monitor manually
( page 346).
/
System limits
The system may be impaired or may not function
particularly in the following situations:
incorrect reference values were taught in
R
sudden pressure loss caused by a foreign
R
object penetrating the tire, for example
there is a malfunction caused by another radio
R
signal source
▌Checking the tire pressure with the tire pres-
sure monitoring system
Requirements
The vehicle is switched on.
R
Driver's display:
© Service
4 5
Press a to confirm.
#