Mercedes-Benz AMG GT Operator's Manual page 284

282 MBUX multimedia system
The traffic delay is displayed for the current
route. The smallest value for the display for
traffic delays is a minute.
Displaying hazard warnings
If hazard warnings are available these can be
shown as symbols on the map. The display
depends on the settings for the Traffic Incidents
option.
In the navigation module (expanded view),
#
select Z ( page 276).
/
Switch Traffic Incidents on or off.
#
If the option is activated, all of the symbols are
shown.
If the option is deactivated, the symbols are
only shown when there is a hazard warning.
The following hazards may be shown on the
map:
Accidents and breakdowns
R
Slippery roads, fog, crosswinds and heavy
R
rain
Hazards reported manually
R
Vehicle with active hazard warning light
R
Roadworks
R
Additional hazards (if available)
R
Displaying online map contents
In the navigation module (expanded view),
#
select Z.
Select View.
#
Switch on an online service, e.g. Weather.
#
Current weather information is displayed on
the navigation map, e.g. temperature or cloud
cover.
The service information is not shown in all
map scales, e.g. weather symbols.
Parking service
* NOTE Damage to the vehicle due to not
observing the maximum permitted head-
room clearance
If the vehicle height is greater than the maxi-
mum permitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged.
Observe the signposted headroom clear-
#
ance.
If the vehicle height is greater than the
#
permitted headroom clearance, do not
enter.
Observe the changed vehicle height with
#
add-on roof equipment.
* NOTE Vehicle damage due to failure to
observe local information and parking
conditions
The data is based on the information provided
by the respective service providers.
Mercedes-Benz does not guarantee the accu-
racy of the information provided in relation to
the car park or parking area.
Always observe the local information and
#
conditions.
% This service is not available in all countries.
In the navigation module (expanded view),
#
select Z and switch on Parking.