Windshield Wiper And Windshield Washer System - Mercedes-Benz AMG GT Operator's Manual

126 Light and visibility

Windshield wiper and windshield washer system

Switching the windshield wipers on/off
g Windshield wipers off
1
Ä Automatic wiping, normal
2
Å Automatic wiping, frequent
3
° Continuous wiping, slow
4
¯ Continuous wiping, fast
5
Turn the combination switch to the corre-
#
sponding position 1 - 5.
í Single wipe: press button 1
#
the point of resistance.
î Wiping with washer fluid: press button
#
1 beyond the point of resistance.
% Observe the notes on washing the vehicle in a
car wash ( page 314).
/
Vehicles with MAGIC VISION CONTROL: in posi-
tion 2 or 3 , the windshield washing process is
automatically triggered if dirt is detected on the
windshield unless the Add Washer Fluid
is being displayed.
Deep-cleaning the windshield
In the case of heavy soiling, you can deep-clean
the windshield above outside temperatures of
41°F (5°C).
In a stationary vehicle, turn the combination
#
switch to position 1, 2 or 3.
Press the button on the combination switch in
#
the direction of arrow
approximately two seconds.
as far as
The wiper arms will move into their replace-
ment positions and washer fluid will be distrib-
uted on the windshield.
After approximately 30 seconds, the wiper
arms will move back again and wipe the wind-
shield several times. Deep-cleaning will now
have finished.
Changing the windshield wiper blades
message
& WARNING Risk of becoming trapped if the
windshield wipers are switched on while
wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch off the windshield wipers
#
and vehicle before changing the wiper
blades.
1 and hold it for