Mercedes-Benz AMG GT Operator's Manual page 107

If you no longer require the folded-down rear seat
backrest as a load area, fold the backrest back
into place.
Press seat belt 1 into side holder 2.
#
In the cargo compartment briefly pull one of
#
buttons 1.
The corresponding seat backrest is then
released and moves forward.
Fold the corresponding seat backrest fully
#
forward.
If a seat backrest in the rear passenger compart-
ment is not fully folded forward or is locked in the
rear position, this is shown in the driver display.
Seats and stowing 105
▌Folding the rear seat backrest back
* NOTE Damage caused by trapping the
seat belt when folding back the seat back-
rest
The seat belt could become trapped and thus
damaged when the seat backrest is folded
back.
Make sure that the seat belt is not trap-
#
ped when folding back the seat backrest.
Make sure that the seat belt is inserted in the
#
side bracket ( page 104).
/