Flush Mounting - Furuno TZtouchXL TZT22X Installation Manual

Multi function display

Hide thumbs Also See for TZtouchXL TZT22X:

Table of Contents

1. MOUNTING

1.2

Flush Mounting

Referring to the figure below, select a flat mounting location. Read the installation in-

structions before starting. Pay particular attention to the notes; failure to follow these

instructions may cause damage to the unit.

Note: Ensure the mounting location is flat, with no indents or protrusions, to allow a

secure fit.

1. Prepare a cutout in the mounting location using the template supplied at the back

of this manual.

2. Drill holes at each screw location (with mounting plate: total 20; without mounting

plate: 12), using the supplied template.

3. For installations with no mounting plate, go to step 4. For installations with a

mounting plate, fit the mounting plate to the inner side of the cutout, then secure

the plate in place with two M325 screws (included as installation materials) per

plate (total 8 places, indicated in the following figure).

4. Connect all cables at the back of the TZT22X/24X (see section 2.1 for details).

1-2

Flat

Screws

8 places

Mounting plate

Curved

Bumpy

Table of Contents

Tztouchxl tzt24x