Furuno TZtouchXL TZT22X Installation Manual page 15

To connect NMEA 0183 equipment to TZT22X/24X, use the NMEA 2000 network via
the optional NMEA data converter IF-NMEA2K2 (or IF-NMEA2K1). This NMEA
connection can accept a baud rate of 4800 or 38400.
Heading input to TZT22X/24X allows functions such as Radar Overlay and course sta-
bilization (North up, etc.) in the radar operating modes. The NMEA 0183 heading re-
fresh rate needs to be 100 ms in order for any radar function to work properly. NMEA
0183 heading can be accepted on any NMEA 2000 port at a baud rate up to 38400
bps.
Note 1: When using the ARPA function, set the heading refresh rate to 100 ms.
Note 2: For more information on connecting and wiring IF-NMEA2K2, refer to their re-
spective installation manuals.
2.6.3 NMEA 2000 input/output
Input PGN
PGN
059392 ISO Acknowledgment
059904 ISO Request
060928 ISO Address Claim
060160 ISO Transport Protocol, Data Transfer
060416 ISO Transport Protocol, Connection Management - BAM group function
065240 ISO Commanded Address
NMEA-Request Group Function
126208 NMEA-Command Group Function
NMEA-Acknowledge Group Function
126464 PGN List - Transmit PGN's group function
126992 System Time
126996 Product Information
126998 Configuration Information
127237 Heading/Track Control
127245 Rudder
127250 Vessel Heading
127251 Rate of Turn
127252 Heave
127257 Attitude
127258 Magnetic Variation
127488 Engine Parameters, Rapid Update
127489 Engine Parameters, Dynamic
127493 Transmission Parameters, Dynamic
127498 Engine Parameters, Static
127503 AC Input Status
127505 Fluid Level
127506 DC Detailed Status
127508 Battery Status
128259 Speed
128267 Water Depth
129025 Position, Rapid Update
129026 COG &SOG, Rapid Update
Description
2. WIRING
2-5