Rear Panel Connectors; Power Button; Audio Inputs - Shure PSM900 Quick Start Instructions

Hide thumbs Also See for PSM900:

Table of Contents

Shure Incorporated

The volume control adjusts signal output to the 3.5 mm headphone jack. NOTE: it does not affect rear panel out-

puts.

⑤ RF switch

Mutes RF output. For setting up multiple systems or adjusting settings without transmitting unwanted RF or audio

signals.

Turns the unit on and off.

Rear Panel Connectors

⑦ Power

Connect the transmitter to a power outlet using the supplied power adapter.

⑧ LOOP OUT

Sends a copy of the audio signal going into the transmitter to another device. See LOOP Applications.

Connect to balanced or unbalanced outputs. Use either connector for mono input. Accepts both 1/4-inch or male

XLR connectors.

⑩ Antenna (BNC)

Attach supplied antenna. If you are rack mounting, use a front panel or remote mounting kit from Shure.

Configuration Menu

Note: Configuration menu items may vary with regional model variations.

RF Settings

RADIO

Sets the group number

Sets the channel number

10/30

Table of Contents