Table of Contents
Advertisement
Crosspoint Gain
Crosspoint gain adjusts the gain between a specific input and output, to create separate submixes without changing input or
output fader settings. Select the dB value at any crosspoint to open the gain adjustment panel.
Gain staging: Input fader > crosspoint gain > output fader
Routing Channels
Connect inputs and outputs by selecting the box where they intersect.
ANIUSB-MATRIX Default Routes
The matrix mixer creates these default routes. Adjust them to fit your needs.
Use Call Status
Designer's call status feature uses microphone LEDs to show if you're in a videoconferencing call or not. This is a room-level
feature, so it applies to all microphones in the same Designer room.
To use call status:
1.
Put all microphones and processors (ANIUSB-MATRIX, IntelliMix Room, or P300) in the same Designer room.
2.
Select Auto route to create audio and mute control routes. You can also route audio manually.
3.
Go to [Your room] > Settings > Call status to turn on call status.
When call status is on:
•
Microphone LEDs off = Not in a call
Shure Incorporated
20/32
Advertisement
Table of Contents
Troubleshooting
