Detaching And Refitting The Paper Feed Drive Unit - Kyocera TASKalfa 266ci Service Manual

Hide thumbs Also See for TASKalfa 266ci:

Table of Contents

(3) Detaching and refitting the paper feed drive unit

1. Remove the rear upper cover, right

upper cover, left upper cover and front

cover (see page 1-5-3).

2. Remove the left rear cover, left cover

and left lower cover (see page 1-5-10).

3. Remove connector (YC3) from engine

4. Remove four screws and then remove

the paper feed drive unit.

5. Check or replace the paper feed drive

unit and refit all the removed parts.

Figure 1-5-68

Figure 1-5-69