Kyocera TASKalfa 266ci Service Manual page 272

4. Remove the right rear cover, right cover
and right lower cover (see page 1-5-6).
5. Remove the controller shield (see page
1-5-31).
6. Remove connector (YC32) from main
PWB.
7. Cut the band and then remove the it.
8. Remove the DP wire and ground wire
from wire holder.
9. Close the scanner unit.
YC32
Figure 1-5-137
Figure 1-5-138
1-5-83
Main PWB
Main PWB
Wire holder
DP wire
Ground wire
2PZ
Band