Kyocera TASKalfa 266ci Service Manual page 130

Service items
Laser Scanner Performing LSU cleaning
Cleaning
Description
The LSU cleaning motor drives the cleaning pad which in turn wipes clean the LSU dust
shield glass.
Purpose
To perform cleaning when the printed image is bad and stripes are seen in the vertical
direction.
Method
1. Enter the Service Setting menu.
2. Select [Laser Scanner Cln].
3. Press the start key.
4. Press [Yes] (the Left Select key). LSU cleaning is performed.
Completion
Press the stop key.
Drum surface Performing drum surface refreshing
refreshing
Description
Rotates the drum approximately 2 minutes with toner lightly on the overall drum. The
cleaning blade in the drum unit scrapes toner off the drum surface to clean it.
Purpose
To clean the drum surface when image failure occurs due to the drum. This mode is
effective when dew condensation on the drum occurs.
Method
1. Enter the Service Setting menu.
2. Select [Drum Refresh].
3. Press the start key.
4. Press [Yes] (the Left Select key). Drum surface refreshing is performed.
Completion
Press the stop key.
Description
1-3-92
2PZ