Kyocera TASKalfa 266ci Service Manual page 162

Code Contents
Machine recovery error
9530
The machine may not be
recovered or may have trou-
ble in its function with
changes of the internal data
when replacing some the
parts at the same time.
F000 Main PWB - operation panel
PWB communication error
F010 Main PWB checksum error
F020 Main PWB RAM checksum
error
F040 Main PWB - print engine
communication error
F041 Main PWB - scanner engine
communication error
F050 Print engine ROM check-
sum error
F051 Scanner engine ROM
checksum error
Causes
PWBs
Defective main Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace main PWB (see page 1-5-31).
Defective opera- Replace the operation panel PWB and
tion panel PWB. check for correct operation.
Defective main Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace main PWB (see page 1-5-31).
Defective main Turn the main power switch off/on to restart
memory (RAM) on the machine. If the error is not resolved,
the main PWB. replace main PWB (see page 1-5-31).
Defective Replace the expanded memory (DIMM) (see
expanded memory page 1-2-11).
(DIMM).
Defective main Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace main PWB (see page 1-5-31).
Replace the engine PWB and check for cor-
rect operation (see page 1-5-28).
Defective main Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace main PWB (see page 1-5-31).
Defective engine Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace engine PWB (see page 1-5-28).
Defective engine Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace engine PWB (see page 1-5-28).
1-4-27
Check procedures/
corrective measures
1. Reattach the parts below in case of
replacing 2 or more of them at the same
time.
Affected parts : Memory, PWBs
* : Do not replace 2 or more of the parts
at the same time
* : And also, do not execute the follow-
ing works when replacing the above
parts.
Do not replace the drum unit or the
developing unit.
Do not replace the drum unit with the
one color for other one in the same
machine.
2PZ-3