Ricoh Gestetner LANIER SAVIN G071 Service Manual page 217

6. NVRAM:
8 kB NVRAM for storing the printer parameters and logged data
7. IEEE 1284 Interface:
Supports compatible, nibble, and ECP modes
8. Network Interface:
100BASE-TX/10BASE-T
9. USB Interface:
See the USB Interface section.
10. NVRAM board (option):
64 kB NVRAM used for storing a record of the number of pages printed under
each "User Code".
11. IEEE 1394 Interface (option):
See the IEEE 1394 Interface section.
12. IEEE 802.11b Interface (option):
See the IEEE 802.1b Interface section.
13. HDD (option):
A 3.5" HDD (20.5 GB) can be connected using the IDE interface. The hard disk
is partitioned as shown below. The sizes cannot be adjusted.
Partition Size
File System 1
500 MB
Image TMP
9800 MB
Job Log
10 MB
The system and application software for the following boards can be downloaded
from the Controller IC Card.
• Controller (Flash ROM and flash ROM DIMM)
• BCU
• NIB
For details about downloading software from an IC card, see Service Tables –
Firmware Update Procedure.
SM
CÓPIA NÃO CONTROLADA
Function
Downloaded fonts, forms.
Collation, sample print,
locked print.
Job log.
6-57
CÓPIA NÃO CONTROLADA
CONTROLLER
Comment
Remain stored even after cycling
power off/on.
Commonly used area for
applications, erased after power off.
Remains stored even after cycling
power off/on.
G071