Ricoh Gestetner LANIER SAVIN G071 Service Manual page 62

7. Install the development unit in the
machine.
8. After installing the development
unit, print out the "development unit
check" sheet to confirm the correct
installation of the development unit
(Menu — Maintenance —
Devp.UnitCheck).
NOTE: A white line or band may
appear on one end of the
paper if a development is
incorrectly installed. To
correct this, pull out the
development unit partially
(about 30 mm) [E] and
slowly reinstall it.
G071
CÓPIA NÃO CONTROLADA
[E]
3-18
CÓPIA NÃO CONTROLADA
DEVELOPMENT UNIT
G070R457.WMF
SM