Ricoh Gestetner LANIER SAVIN G071 Service Manual page 105

Bit Switch 1
Bit
0 Key protect [0: Not activated, 1: Activated] DFU
1 (Not used.) DFU
2 (Not used.) DFU
3 (Not used.) DFU
4 (Not used.) DFU
5 (Not used.) DFU
6 (Not used.) DFU
7 Emulation print area (RPCS only). [0: Not printed, 1: Printed]DFU
Bit Switch 2
Bit
1 Overlap job mode (njob) [0: Not activated, 1: Activated] DFU
⇒
3 PDL Sniffing- See PUB(C)-051 for details. 0: Enabled, 1: Disabled
"Letterhead mode" display in UP mode (*NOTE) [0: Not activated, 1:
4
Activated]
NOTE: In addition to 2-4 Bit Switch setting, press the following keys to enter the
hidden menu display mode.
#Enter
The hidden indication "Letterhead mode" appears at the bottom of "system"
menu. You can select the letterhead mode in this menu.
Bit Switch 3
Bit
⇒
0 PS Fonts Download- See PUB(C)-045 for details. 1: ON, 0: OFF
Bit Switch 4
Bit
Background areas of simple graphics (RPDL, R16, R55, R98) [0: Not
0
painted, 1: Painted] DFU
1 Unknown 2-byte characters (R98) [0: Cleared, 1: Not cleared] DFU
Specifies portrait/landscape reset (R16) [0: Reset by the reset
2
command, 1: Not reset by the reset command] DFU
3 Changes line thickness adjustment mode [0: Mode 1, 1: Mode 2] DFU
Displays or not displays error messages No. 84 through DF (RPDL,
4
R16, R55, R98, GL/GL2). [0: Displays, 1: Not displays] DFU
Displays or not displays error messages No. E1 and higher (RPDL, R16,
5
R55, R98, GL/GL2). [0: Displays, 1: Not displays] DFU
6 Changes the tray setting (GL/GL2). [0: LP, 1: MFP] DFU
7 Changes the default tray. [0: LP (Tray 1), 1: MFP (System default)] DFU
SM
CÓPIA NÃO CONTROLADA
Function
Function
Escape Menu
Function
Function
5-7
CÓPIA NÃO CONTROLADA
SP MODE TABLES
Default
0
0
0
0
0
0
0
0
Default
1
0
0
Default
0
Default
0
0
0
0
0
0
0
0
G071