Paradyne KeepInTouch 3760 User Manual page 46

Table 4-1. AT Command and S-Register Reference (6 of 27)
AT
Command
Description
or
S-Register
X n
Extended Result Codes, Dial Tone Detect, Busy Tone
Detect
(continued
from
X0
previous
page)
X1
X2
X3
X4
X5
X6
X7
Disables extended result codes 5 –16, dial tone
detect, and busy tone detect . See above note
concerning blind dialing.
Enables extended result codes 5 –16, disables
dial tone detect and busy tone detect . See
above note concerning blind dialing.
Enables extended result codes 5 –16 and dial
tone detect, disables busy tone detect .
Enables extended result codes 5 –16, disables
dial tone detect, enables busy tone detect .
See above note concerning blind dialing.
Enables extended result codes 5 –16, dial
tone detect, and busy tone detect .
Adds error control suffix (REL) to extended
result codes 20 –27 if error control is used,
enables dial tone detect and busy tone detect.
Adds either V.42 or MNP suffix to extended
result codes 20 –27 if data compression is used,
enabled dial tone detect and busy tone detect.
Computer's data rate appears in the Connect
message instead of the telephone line data rate,
enables dial tone detect and busy tone detect.
Issue 3 April 1994
4-7