Paradyne KeepInTouch 3760 User Manual page 85

Table C-1. Result Codes (3 of 3)
Number 1,
Word
Number 2
NOTE: The following result codes are enabled by the
X5 command (REL suffix) or the X6 command (V.42, V.42 bis,
MNP 2, MNP3, MNP4, or the MNP 5 suffix).
20,10 CONNECT
2400/REL
21,11 CONNECT
4800/REL
22,12 CONNECT
9600/REL
23,16 CONNECT
12000/REL
24,13 CONNECT
14400/REL
26,15 CONNECT
7200/REL
27,5 CONNECT
1200/REL
40,40 FORBIDDEN
41,41 DELAYED xx
NOTE: The following result codes are enabled by the
X7 command (Computer data rate suffix).
15,14 CONNECT
19200
28,28 CONNECT
38400
30,30 CONNECT
57600
Description
Connection at 2400 bps with error
control
Connection at 4800 bps with error
control
Connection at 9600 bps with error
control
Connection at 12,000 bps with error
control
Connection at 14,400 bps with error
control
Connection at 7200 bps with error
control
Connection at 1200 bps with error
control
Forbidden number called. Forbidden
numbers are those at which a voice
has been detected (available in
Europe only).
Call was not placed because a delay
is still in effect for xx minutes. Try
again after xx minutes (available in
Europe and Japan only).
Connection at 19,200 bps
Connection at 38,400 bps
Connection at 57,600 bps
Issue 3 April 1994
C-3