Paradyne KeepInTouch 3760 User Manual page 10

!
CAUTION:
Users should not attempt to make such connections
themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
The Load Number for this equipment is listed on the modem's
label. The Load Number (LN) assigned to each terminal device
denotes the percentage of the total load to be connected to a
telephone loop which is used by the device to prevent
overloading. The termination on a loop may consist of any
combination of devices subject only to the requirement that the
total of the Load Numbers of all devices does not exceed 100.
If your equipment is in need of repair, return it to its place of
purchase or arrange to have your equipment repaired by
contacting Inventory Control Office, 100 York Blvd., Suite 200,
Richmond Hill, Ontario L4B1J8, telephone (416) 494-0453.
United Kingdom
Facilities
This apparatus has been approved for the use of the following
facilities:
G
Modem
G
Automatic call initiation
G
Detection of initial proceed indication
G
Auto Answering
G
Operation in the absence of proceed indication
G
Auto Clear from the call originating end
G
Storage of telephone numbers for retrieval by a
predetermined code
G
Multifrequency and Loop Disconnect signalling
Any other usage will invalidate the approval of the apparatus if
as a result it then ceases to comply with the standards against
which approval was granted.
Issue 3 April 1994
H