Paradyne KeepInTouch 3760 User Manual page 58

Table 4-1. AT Command and S-Register Reference (18 of 27)
AT
Command
Description
or
S-Register
\T n
No Data Disconnect Timer
This command forces the modem to disconnect if no
data is transmitted or received within a specified time
period.
\T0
\Tn
\X n
XON/XOFF Passthrough Flow Control
This command controls whether or not the modem
passes XON/XOFF characters from the locally
attached computer through to the remote modem.
\X0
\X1
%A n
Error Control Fallback
This command allows you to change the ASCII value
of the error control fallback character n to an ASCII
value from 0 to 127. The factory default is 13, an
ASCII carriage return.
%B n Modulation/Data Rate
This command sets the modem's modulation and
maximum data rate.
%B300
%B1200
%B2400
%B4800
%B7200
%B9600
%B12000 V.32 bis – max rate 12,000 bps
%B14400 V.32 bis – max rate 14,400 bps
Disable
Sets the No Data Disconnect Timer to value n,
which varies by country. See Table 4-2 for
acceptable values.
Disable (do not pass XON/XOFF)
Enable
V.21 or Bell 103 – max rate 300 bps
V.22, V.23, or Bell 212A –
max rate 1200 bps
V.22 bis – max rate 2400 bps
V.32 bis/V.32 – max rate 4800 bps
V.32 bis – max rate 7200 bps
V.32 bis/V.32 – max rate 9600 bps
Issue 3 April 1994
4-19