Paradyne KeepInTouch 3760 User Manual page 59

Table 4-1. AT Command and S-Register Reference (19 of 27)
AT
Command
Description
or
S-Register
%C n
V.42 bis and MNP 5 Data Compression
This command enables or disables the use of
V.42 bis and MNP Level 5 data compression. Online
changes do not take effect until a disconnect occurs.
%C0 Disable
%C1 Enable
%R n
Disable Autobaud and Set DTE Rate
This command enables or disables the autobaud
function and sets the data rate for the DTE interface.
The changes made by this command are volatile and
cannot be saved. When the modem is reset, autobaud
is once again enabled.
%R
%R300
%R600
%R1200
%R2400
%R4800
%R9600
%R12000 Disables autobaud, sets DTE rate to 12000
%R14400 Disables autobaud, sets DTE rate to 14400
%R19200 Disables autobaud, sets DTE rate to 19200
%R38400 Disables autobaud, sets DTE rate to 38400
%R57600 Disables autobaud, sets DTE rate to 57600
4-20
Issue 3 April 1994
Enable autobaud
Disables autobaud, sets DTE rate to 300
Disables autobaud, sets DTE rate to 600
Disables autobaud, sets DTE rate to 1200
Disables autobaud, sets DTE rate to 2400
Disables autobaud, sets DTE rate to 4800
Disables autobaud, sets DTE rate to 9600