Paradyne KeepInTouch 3760 User Manual page 55

Table 4-1. AT Command and S-Register Reference (15 of 27)
AT
Command
Description
or
S-Register
\C n
Error Control Negotiate Buffer
This command will control whether or not the modem
buffers (saves into a temporary waiting area) the data
that it received from the remote modem during an
interval in which the modem attempts to establish a
connection using V.42 or MNP error control. Online
changes to this option do not take effect until a
disconnect occurs.
\C0
\C1
\C2
\D n CTS Control
This command controls the Clear-to-Send (CTS)
signal sent to the computer.
\D0
\D1
\D2
\D3
\G n
Modem-to-Modem Flow Control
This command controls XON/XOFF flow control.
\G0
\G1
4-16
Issue 3 April 1994
Disable
Enable
Disable and Switch
Forced ON.
Follows standard RS-232 operation.
Wink when disconnected.
Follows state of DTR signal.
Disables
Enables