Dubbing From The Camcorder To A Vcr - Hitachi Hi8 VM-H675LA Instruction Manual

Dubbing from the Camcorder to a VCR
Connect the camcorder to a VCR to copy your or a friend's home 8mm recordings to VMS. ;,
J Connect your camcorder to the VCR, following
"Playing Back Your Recording on Your TV" on
pages 50-51.
O Turn on your VCR and place it in the camcorder
input mode (consult ■ your VCR manual for
details). Operate the television as you normally
do to see the signal coming from the VCR.
^ Hold down the small button of the CAM/
OFF/ VIDEO switch while you slide the switch
to VIDEO.
A
Insert the recorded tape in the camcorder and a
blank tape into the VCR. Set the VCR to record.
C Play the tape from the camcorder while record¬
ing on the VCR.
Note: If the VCR is connected to a: television
and the VCR/TV selector is set to VCR you can
monitor the tape being dubbed.
Note: Reduce: the volume of the camcorder as
low as possible during dubbing. Otherwise the
played back pictures could be distorted.
Note: During multi playback (PAL60 output/
M-PAL output), dubbing may not be possible
with some VCRs.
E52 HITACHI