Dubbing From The Camcorder To A Vcr - Hitachi Digital 8 VM-D965LA Instruction Manual

Dubbing from the Camcorder to a VCR
Conned the can reorder to a CCSR ro copy , out or tHe r ;d Is hoi ne Smnr reccrdi; gs re CHS.
• Connections with an AY cable
"1 Connect your camcorder to the VCR, following
"Playing Back Your Recording on Your TV" on
pages 50-51.
2 Turn on your VCR and place it in the camcorder
input mode (consult your VCR manual for
details). Operate the television as you normally
do to see the signal coming from the VCR.
Ct Hold down the small button of the CAM/
' OFF /VIDEO switch while you slide the switch
to VIDEO.
Insert the recorded tape in the camcorder and a
blank tape into the VCR. Set the VCR to record.
C
Play the tape from the camcorder while record-
^ ing on the VCR.
Note; If the VCR is connected to a television
and the VCR/TV selector is set to VCR, you can
monitor the tape being dubbed.
Note; Reduce the volume of the camcorder as
low as possible during dubbing, Otherwise the
played back pictures could be distorted.
• Connections with an i.LINK (DV) cable
You can connect this camcorder to video equipment with a DV terminal, using an i.LINK (DV) cable for
dubbing. There will be minimal deterioration of video and audio since the digital signal is transferred.
The information displayed on the screen cannot be dubbed.