Ryobi RBC254SESO Original Instructions Manual page 28

STORAGE
STORING THE PRODUCT
1. Turn off the product, and allow it to cool
down.
NOTE: Make sure to clean the product before
storing.
2. Loosen and remove the fuel cap. Drain all
the fuel from the tank into a container that
is approved for petrol. Remember to replace
and tighten the fuel cap properly.
3. Loosen the knob, and press the lock button.
Remove the lower shaft from the upper shaft.
Place the hanger cap over the top end of the
lower shaft.
26
1
2
2
1
3
1
3
4
2
3