Ryobi RBC254SESO Original Instructions Manual page 20

OPERATION
4. Hold down the trigger lock and squeeze the
throttle trigger, and keep the throttle trigger
squeezed completely. Use your right hand
to put the electrical starter shaft into the
shaft hole on the engine. Make sure that the
starter is properly engaged. Press and hold
the electrical starter switch button until the
engine starts.
NOTE: If the engine does not start, repeat
the procedure from step 3. Do not repeat
the procedure more than once. If the engine
does not start after the second attempt, see
the solution instruction for a flooded engine in
the "Troubleshooting" section of this manual.
5. Hold down the trigger lock and squeeze the
throttle trigger to operate the product.
18
4
1
2
5
1
2
4
4s 4s
3