Ryobi RBC254SESO Original Instructions Manual page 16

OPERATION
STARTING THE PRODUCT (WARM ENGINE)
1. Lay the product on the ground. Ensure that
the cutting means will not contact anything
when it starts to rotate. Press the primer
bulb 10 times. Set the choke lever to
position.
2. Hold down the trigger lock and squeeze the
throttle trigger to operate the product. Pull the
starter grip until the engine starts. Do not pull
the starter grip more than 6 times.
14
1
x10
1
2
1
2
2
6x
3
6 6 6