Xct-S10 Digital Cinema Server - Sony SRX-R510 Operating Instructions Manual

XCT-S10 Digital Cinema Server

Front
a POWER indicator
Shows the status of the server's power.
For further details, see "How to Read the Indicators"
(page 44).
b SYSTEM SW switch
Starts up the server.
c
(HDD) 1/2 indicator
Shows the status of the HDD.
For further details, see "How to Read the Indicators"
(page 44).
d Ventilation holes (intake)/air filter
For details on air filter cleaning, refer to the
"Maintenance Manual."
Rear
e INGEST PORT 1/2 connector
For inserting HDD or USB memory to ingest DCP/
KDM.
These can only be used for a USB HDD or USB
memory device.
For systems on which periodic calibration using SPLs
is performed, connect the calibration camera to the
INGEST PORT 1 connector.
For further details, see "Ingesting from HDD via
USB Connector" (page 19), and "Ingesting from a
USB Flash Drive" (page 21).
f CRU DATAPORT
For inserting HDD to ingest DCP/KDM.
A CRU DATAPORT carrier is necessary to use the
CRU DATAPORT. For further details, contact
qualified Sony service personnel.
8