Starting The Projectors - Sony SRX-R510 Operating Instructions Manual

3
Tap [Login].
Once you log in to the system, the "Status" screen will
be displayed.
Proceed to "Starting the Projectors" (page 16).
To change your login password
As a user, you can change your own password.
1
Tap the area where the user name is displayed at the
top right of the screen to display the "Login" screen,
and tap [Change Password].
A screen for changing your password will be
displayed.
2
Enter the old password and new password, and then
tap [OK].
Tap each field to display a virtual keyboard, and enter
the necessary information.
3
Tap [OK] when the confirmation screen appears.
Your password will be changed.
Changing the login user
1
Tap on the upper right of the screen.
2
Select [Logout], and then tap [OK].
3
Tap [OK] when the confirmation screen appears.
The "Login" screen will be displayed.
4
Change the user and log in.

Starting the Projectors

1
In the "Status" screen, tap [Standby].
The "Projector Lamp Control" dialog box will be
displayed.
16