Attaching and Removing
the Lens
Before changing the lens
The projection system must be shut down, and the
projector switch must be set to off before changing the
lens.
Caution
Changing the lens while the power is on may damage the
projector.
1
Shut down the projection system.
2
Move the projector power switch to the off position.
For detailed steps, see "Shutting Down the System"
(page 17).
Removing the Lens
1
Press the lock button all the way, and after the lock is
released, press and hold the lock button and lift the
lens fixing lever toward
.
Raise the lever while
holding down the lock
button.
Caution
If you lift the lever without pressing the lock button,
the lock button and lever will be damaged. Be sure to
press the lock button and make sure the lock is
released before lifting the lever.
42
Lens fixing lever
Press.
Lock button