Sony SRX-R510 Operating Instructions Manual page 45

The relationship between the way the indicators light and
the device's status is shown in the following table.
Projector (rear) (status indicators)
MAIN LAMP
Lit red Lit red
Lit green Blinking
green (rapid)
Lit green Lit green
Lit green Blinking
green (slow)
Blinking Blinking
green (rapid) green (rapid)
Projector (rear) (status indicators)
IMB
Lit red
Lit green
Blinking green (rapid)
Blinking red (rapid)
Projector (rear) (status lights)
Status light
Lit green
Blinking green
Blinking yellow
Blinking red
Off
Projector (IMB section) (Status indicator)
STATUS 1
Solid red
Solid orange
Solid green
STATUS 2
Solid red
Solid green
Device status
Standby mode
Starting up
Power on (lamp on)
Power on (lamp off)
Shutting down or cooling
Device status
Standby mode
Access from server or start-up
complete
Shutting down
Shutdown complete
After shutting down the server, it
is necessary to turn the power
switch on the rear of the projector
off and on again.
Device status
System stable and projector on,
standby mode, or lamp off
System shutting down
System starting up
Ingesting
Playing
Projector status changing
Minor error
Severe error (hardware
malfunction, show failure)
Power off
Device status
Start-up
Connecting to the server
Connection to server complete
Device status
IMB section error
Contact qualified Sony service
personnel
Normal
Caution
If STATUS 1 indicator does not turn solid green even after
a few minutes when connected to the server, contact
qualified Sony service personnel.
Server (front)
POWER
Lit red
Blinking green (rapid)
Lit green
Caution
When the MAIN indicator is solid red and the IMB
indicator is solid green, do not set the power switch on the
rear of the projectors to OFF. After shutting down from the
server, set the power switch on the rear of the projectors to
off.
HDD1 indicator: Shows that the hard disk drive for the
system is being accessed.
HDD2 indicator: This indicates the RAID access
containing the DCP.
45
Device status
Standby mode
Starting up, shutting down
Startup complete