Table of Contents
Advertisement
Connector block: Sub projector
a NETWORK connector (RJ-45 modular jack)
Used to connect to the server's PRJ connector with the
supplied LAN cable.
b INTER LOCK connector (D-sub 15 pin, female)
This is not used in this system.
c RS-232C connector (D-sub 9 pin, female)
Used to connect to a LKRA-PCAB1.
Main projector: Use the supplied connection cable
to connect the CTRL2 connector on the LKRA-
PCAB1.
Sub projector: Use the supplied connection cable to
connect the CTRL1 connector on the LKRA-
PCAB1.
d AUDIO OUTPUT BAL/UNBAL (audio output
BAL/UNBAL) (AES/EBU) connector (D-sub 25
pin, female)
For connecting to an audio signal processor.
e STATUS 1/2 (Status 1/2) indicator
Shows the status of the projector.
For further details, see "How to Read the Indicators"
(page 44).
f SERVER connector
Used to connect to the server with the supplied PCI
express cable (2 m).
g RS-232C connector
This is not used in this system.
h Link B OUT connector
Connect this connector on the main projector to the
Link B IN connector on the sub projector.
This connector is not used on the sub projector.
LKRA-010
i Link B IN connector
Connect this connector on the sub projector to the
Link B OUT connector on the main projector.
This connector is not used on the main projector.
j Link A OUT connector
Connect this connector on the main projector to the
Link A IN connector on the sub projector.
This connector is not used on the sub projector.
k Link A IN connector
Connect this connector on the sub projector to the
Link A OUT connector on the main projector.
This connector is not used on the main projector.
l HDMI IN 1/2 (HDMI input 1/2) connector
For HDMI signal input.
For details on signal format, see "HDMI signals"
(page 52).
7
Advertisement
Table of Contents
