Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
38
Press the new bearing ring up to the stop with special tool
©
1
4
Tool bracket (58429089000) (£S p. 321)
Press-in tool (58429091000) (SS p. 321)
m
D00832-10
Remove lower steering head bearing
0
Remove the seal ring.
Grease and mount the new seal ring.
Press on the new bearing with a suitable tube as far as it will go.
0
Ac
D00833-10
Finishing work
-
Install the lower triple clamp. (S8 p. 35)
-
Install the front fender, (il p. 96)
-
Install the headlight mask with the headlight. (H8 p. 141)
-
Install the front wheel using a work stand. (H p. 102)
-
Remove the motorcycle from the work stand, (HI p. 12)
-
Check that the wiring harness, throttle cables, and brake and clutch lines can
move freely and are routed correctly.
-
Check the play of the steering head bearing. (HI p. 33)
-
Check the headlight setting. (H8 p. 140)
Advertisement
Table of Contents
