NETGEAR S3600 Series User Manual page 497

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
If you do not know the IP address of the switch, see Access the switch on-network
and connected to the Internet on page 25 or Access the switch off-network and not
connected to the Internet on page 32.
The Device Admin Password page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
4. Click the Login button.
The Dashboard page displays.
5. Select Security > ACL > VLAN ACL.
The VLAN ACL page displays.
6. To delete a VLAN-to-ACL binding, do the following:
a. Select the check box for the VLAN ID.
b. Click the Delete button.
The binding is removed.
The following table describes the information that is displayed in the VLAN Binding
Configuration table.
Table 87. Interface MAC ACL binding information
Field Description
VLAN ID The ID of the VLAN to which the ACL is bound
Direction The packet filtering direction for the ACL, which is always inbound
Sequence Number The sequence number signifying the order of the ACL relative to other ACLs bound to
the VLAN
ACL Type The type of ACL
ACL ID The ACL number or name
Configure Access Control Lists 497 User Manual