Display Dhcpv6 Server Statistics - NETGEAR S3600 Series User Manual

8-port or 16-port 10g/multi-gigabit ethernet smart switch with 2 sfp+ ports
Hide thumbs Also See for S3600 Series:
Table of Contents

Advertisement

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
4. Click the Login button.
The Dashboard page displays.
5. Select System > DHCP Services > DHCP IPv6 Server > DHCP IPv6 Binding.
The DHCP IPv6 Binding page displays. The table displays information about all
DHCPv6 server bindings.
6. To clear a binding, select the check box for the binding, and click the Clear button.
7. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 29. DHCP bindings information
Field
IPv6 Address
IAID
Lease Time Left

Display DHCPv6 server statistics

To display the DHCPv6 server statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network,
or connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser and enter the IP address of the switch in the address field of
your web browser.
If you do not know the IP address of the switch, see Access the switch on-network
and connected to the Internet on page 25 or Access the switch off-network and not
connected to the Internet on page 32.
The Device Admin Password page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
Configure Switch System
Settings
Description
The client's IPv6 address
The client's interface association identifier (IAID). This is a binding between
the interface and one or more IP addresses.
The remaining lease time in days, hours and minutes (dd:hh:mm format)
157
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xs508tmXs516tm

Table of Contents