Mechanical Specifications; Power Supply Specifications - HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Hide thumbs Also See for ProLiant ML30 Gen10 Plus:
Table of Contents

Advertisement

Standard operating support
Standard operating support
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1,000 ft) above sea level to a
maximum of 3,050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr​ (36°F/hr). The upper limit and rate of
change may be limited by the type and number of options installed.
System performance during standard operating support might be reduced if operating above 30°C (86°F).
Extended ambient operating support
Extended ambient operating support
For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C
(95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2,953 ft) to a
maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at the Hewlett Packard Enterprise
website.
website
40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m
(2953 ft) to a maximum of 3,050 m (10,000 ft). The approved hardware configurations for this system are listed on the Hewlett
Packard Enterprise website
Packard Enterprise
website.

Mechanical specifications

Mechanical specifications
Specification
Specification
Dimensions
Dimensions
Height
Depth
Width
Weight, approximate values
Weight, approximate values
Minimum
Maximum

Power supply specifications

Power supply specifications
Depending on the installed options and the regional location where the server was purchased, the server can be configured with one of
the following power supplies:
HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)
HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply (94% efficiency)
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise
HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)
HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)
Specification
Specification
Input requirements
Input requirements
Value
Value
36.83 cm (14.50 in)
47.50 cm (18.70 in)
17.53 cm (6.90 in)
10.40 kg (22.93 lb)
19.00 kg (41.89 lb)
Hewlett Packard Enterprise website
Value
Value
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide
Hewlett Packard Enterprise
Hewlett
website.
161

Advertisement

Table of Contents
loading

Table of Contents