Mute/Solo
The MU100R has convenient Mute and Solo functions for selectively mut-
ing or soloing any of the 32 normal Parts and the A1 and A2 A/D Parts. This
is especially useful when playing back several Parts from a connected com-
puter or sequencer. Mute lets you silence one Part to hear how all of the
other Parts sound without it. Solo lets you isolate a single Part, to hear how
that Part sounds by itself.
In the Performance mode, Mute and Solo are especially effective tools
that help you as you edit the Parts, since they allow you to better hear how
the changes you make affect specific Voices as well as the overall sound of
the Performance.
Using Mute/Solo
Operation
1 Select the desired Part.
Make sure the Single Part mode is active (see page 108), then
use the [PART -/+] buttons to select the Part.
2 Press the [MUTE/SOLO] button.
While playing the keyboard (or during playback of a song from
a sequencer), press the [MUTE] button. Each press cycles
through the three functions: Mute, Solo and Normal operation.
Selected Part number.
The selected Part is muted, while all other Parts sound normally.
Guided Tour
Mute/Solo
85