Powering Up - Yamaha MU100R Owner's Manual

Powering Up

Powering Up
Admittedly this is a simple operation, but you should be careful to follow the
instructions below to avoid possible damage to your equipment and speakers.
Operation
1 Turn on the power of your MIDI keyboard.
2 Turn on the power of the MU100R.
Press the POWER switch.
After the animated greeting display finishes, the following dis-
play appears:
3 Turn down all volume controls.
This includes the MU100R and any connected equipment.
4 Turn on the amplifier/speaker system.
5 Set the volume controls.
First, set the volume control on the MU100R to about the mid-
way position, then set the volume on the amplifier to a suitable
level.
Powering Down
When you turn the power off, make sure to do it in the following order:
1) Amplifier/speaker system
2) MU100R
3) Other connected equipment (MIDI keyboard, etc.)
This prevents possible damage to the speakers.
14
Guided Tour