Yamaha MU100R Owner's Manual page 156

Dry/Wet (Insertion connection)
Range: D63>W — (D=W) — D<W63
Adjusts the level balance of original
sound (dry, or D) and processed sound
(wet, or W). A setting of (D=W) results
in an equal balance of dry and wet sound.
Assignable Controller 1 Variation Con-
trol (AC1VarCtrl) (Insertion connection)
Range: 000 — 127
Determines the amount of effect the As-
signable Controller has on the Variation
effect.
Variation Pan (VarPan) (System
connection)
Range: L63 — C — R63
Determines the pan position of the Varia-
tion effect.
Send Variation to Chorus
(SendVar Cho) (System connection)
Range: 000 — 127
Determines the amount of Variation ef-
fect sound that is sent to the Chorus ef-
fect.
Send Variation to Reverb
(SendVar Rev) (System connection)
Range: 000 — 127
Determines the amount of Variation ef-
fect sound that is sent to the Reverb ef-
fect.
Variation Connection (VarConnect)
Settings:
Determines how the Variation effect is
connected in the effect chain of the
MU100R. When set to SYS (System),
Variation is applied to all Parts, accord-
ing to the amount of Variation Send set
for each Part. When set to INS (Insertion),
Variation is applied to only the selected
Part, set in Send Variation parameters (see
above).
NOTE
The common parameters above are common
to nearly all the Variation effect types. (Ex-
ceptions are described in the separate
SOUND LIST & MIDI DATA booklet.)
Effect Edit Mode
Variation (VAR)
INS (Insertion), SYS (System)
145