Saving Your Original Performance - Yamaha MU100R Owner's Manual

Editing in the Performance Mode
2) Select Part 1.
3) Select and change these parameters:
Provided your connected keyboard has a modulation wheel (most
do), and all other settings are appropriate, you can create wide, dy-
namic filter sweeps by holding notes and moving the modulation
wheel.

Saving Your Original Performance

Once you've edited a Performance, you can give it a different name and save
it for future recall. The MU100R has 100 Internal memory locations for
your original Performances.
For instructions on naming a newly created Performance, see page 132.
Operation
1 Press the [EDIT] button.
2 Select "STORE."
Either Preset or Internal Performances can be edited, but they can
only be saved to the Internal bank.
3 Select a different Internal number, if desired.
Use the [VALUE -/+] buttons or data dial.
4 Press the [ENTER] button to save the Performance, or press the
[EXIT] button to cancel.
Saving the new Performance will erase the old one. You can re-
store the factory-programmed Internal Performances from in-
cluded floppy disk.
52
LPF Cutoff: –64
LPF Reso: +50
Guided Tour