Yamaha MU100R Owner's Manual page 89

Harmony Effect
3 Call up the Harmony System menu (in the Utility mode).
4 Set the Harmony Channel to 1.
Use the [SELECT <] button to select "Harmony Ch" (Harmony
Channel), then set the parameter to "01" to match it with the
transmit channel of the connected MIDI keyboard.
5 Call up the Harmony Edit menu.
6 Set the Harmony Insert Part to the corresponding A/D Part.
Use the [SELECT >] button to select "Ins Part" (Insert Part), then
set the parameter to "AD01".
78
To do this:
1) Press the [UTIL] button.
2) Select "PLUGIN" with the [SELECT </>] buttons, and
press the [ENTER] button.
3) Select "PLG100-VH" (Harmony) with the [SELECT >] but-
ton, and press the [ENTER] button.
To do this:
1) Press the [EFFECT] button.
2) Select "PLG" (with the [SELECT >] button) and press the
[ENTER] button.
3) At the "PLG100-VH" (Harmony) menu, press [ENTER]
again.
Guided Tour