Yamaha MOTIF RACK ES Owner's Manual page 62

Effect block Effect connection in each mode (Effect Connection Edit)
Performance mode
The Effect parameters in the Performance mode are set for each Performance and the settings are stored as a User Performance.
[SHIFT]+[PERFORM]
select Effect Connection Edit by pressing
[EFFECT] once or twice
Tone Generator
block
Part 1
Part EQ
*1
The Insertion connection type
depends on the setting of the Voice
assigned to the selected Part.
Multi mode
The Effect parameters in the Multi mode are set for each Multi and the settings are stored as a User Multi.
[MULTI] (LED lights in green)
Connection Edit by pressing [EFFECT] once or twice
Tone Generator
block
Part 1-16
Part 1
Part EQ *2
Plug-in Part 1-2
(When the Single-
part Plug-in Board
has been installed)
Tone Generator block
Part 17-32
(When the Multi-part Plug-in Board
PLG100-XG has been installed)
n The Insertion Effect, Plug-in Insertion Effect, and the System Effect cannot be applied to Parts 17-32 (when using the Multi-part Plug-in Board PLG100-XG).
n The Part EQ cannot be applied to Parts of the Plug-in Board.
n The System Effects (Reverb, Chorus), the Master EQ, and the Master Effect are not applied to the sound output through the ASSIGNABLE OUTPUT jacks. (Only the Part EQ
and the Insertion Effect are applied.)
62
Owner's Manual
select Performance
Part 1
Insertion Effect
(VCE INS)
1
2
select Multi select Effect
Part 1
*1
Insertion Effect
(VCE INS)
1
2
System Effect
Reverb (REV), Chorus (CHO)
*2
Send Return
Level Level
Master Effect
[SHIFT]+[PERFORM]
select Performance Edit by pressing [EDIT] once
or twice [SHIFT] + [COMMON]
System Effect
Reverb (REV), Chorus (CHO)
*3
[MULTI] (LED lights in green)
Send Return
select Multi
Level Level
[SHIFT]+[COMMON]
display
Master Effect
1. You can select the desired Part(s) (up to eight) to which the
Insertion Effects are to be applied.
[MULTI] (LED lights in green)
lights in red)
The Insertion Effect settings depend on the settings of the Voice
assigned to each Part (made in the Voice mode; page 29).
*2 [MULTI] (LED lights in green)
ENTER] (LED turns off)
select Part
*3 [MULTI] (LED lights in green)
ENTER] (LED turns off)
select Part
*4 [MULTI] (LED lights in green)
[SHIFT]+[COMMON]
MEQ parameters
*1 [SHIFT]+[PERFORM] select Performance
select Performance Edit by pressing [EDIT] once or
twice [MUTE/SEL/ENTER] (LED turns off)
select Part EQ display
*2 [SHIFT]+[PERFORM] select Performance
select Performance Edit by pressing [EDIT] once
or twice [SHIFT] + [COMMON]
display
*3 [SHIFT]+[PERFORM] select Performance
select Performance Edit by pressing [EDIT] once or
twice [SHIFT] + [COMMON]
General display MEQ parameters
*3
Master EQ
select Performance
MEF display
[EDIT]
MEF
*4
Master EQ
select Multi
Effect display "InsEF"
select Multi
[MUTE/SEL/ENTER] (LED turns off)
EQ display
select Multi
[MUTE/SEL/ENTER] (LED turns off)
Output display
select Multi
MEF display or General display
Output
MEQ display or
Output
Output
[MULTI] (LED
[MUTE/SEL/
[MUTE/SEL/
[EDIT]