Yamaha MOTIF RACK ES Owner's Manual page 50

Saving the settings (Store)
Edit Indicator
If you alter any parameters, the
right of the display. This indicates that the current Voice/Multi has
been modified but not yet stored.
CAUTION
When you select another program number or another mode, the Edit
indicator will disappear and all edited data will be lost. You should always
save your edited data with the Store function.
50
Owner's Manual
indicator will appear in the top
Edit indicator
Voice/Performance/Multi Name settings (Entering
Characters)
In the General display of the Voice/Performance/Multi Common
Edit mode is a Name parameter that allows you to assign names
to your data. In this section, you'll see how to enter characters in
the Name display (Voice/Performance/Multi Edit mode).
1.
Select the "Name" parameter in the Voice/Performance/
Multi Common Edit mode (pages 27, 34).
2.
Use the BANK [E][F] buttons to move the cursor to the
position of the first character.
3.
Use the data dial to enter the desired character.
4.
Use the BANK [E][F] buttons to move the cursor to the
position of the next character.
5.
Repeat Steps 2 and 4 until the desired name is entered.
Using the Character list
When entering characters, you can call up a special pop-up
Character list by pressing and holding down the [SHIFT] button.
To return back to the original display, release the [SHIFT] button.
To select characters from the Character list, simultaneously hold
down the [SHIFT] button and use the BANK [E][F] buttons or the
data dial.